Reference Guide

500 | Dynamic Host Configuration Protocol (DHCP)
www.dell.com | support.dell.com
• pool
• show ip dhcp binding
• show ip dhcp configuration
• show ip dhcp conflict
• show ip dhcp server
clear ip dhcp
c s
Reset DHCP counters.
Syntax
clear ip dhcp
[binding {address} | conflict | server statistics]
Parameters
Command Mode
EXEC Privilege
Default
None
Command
History
Usage
Information
Entering <CR> after clear ip dhcp binding, clears all the IPs from the binding table.
debug ip dhcp server
c s
Display FTOS debugging messages for DHCP.
Syntax
debug ip dhcp server
[events | packets]
Parameters
Command Mode
EXEC Privilege
Default
None
Command
History
binding
Enter this keyword to delete all entries in the binding table.
address
Enter the IP address to clear the binding entry for a single IP address.
conflicts
Enter this keyword to delete all of the log entries created for IP address
conflicts.
server statistics
Enter this keyword to clear all the server counter information.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
events
Enter this keyword to display DHCP state changes.
packet
Enter this keyword to display packet transmission/reception.
Version 8.2.1.0 Introduced on C-Series and S-Series.