Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 501
default-router
c s
Assign a default gateway to clients based on address pool.
Syntax
default-router
address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
disable
c s
Disable DHCP Server.
DHCP Server is disabled by default. Enable the system to be a DHCP server using
the
no form of the disable command.
Syntax disable
Command Mode
CONFIGURATION
Default
Disabled
Command
History
dns-server
c s
Assign a DNS server to clients based on address pool.
Syntax
dns-server address
[address2...address8]
Parameters
address
Enter the a list of routers that may be the default gateway for clients on the subnet.
You may specify up to 8. List them in order of preference.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter the a list of DNS servers that may service clients on the subnet. You may list up
to 8 servers, in order of preference.