Reference Guide

502 | Dynamic Host Configuration Protocol (DHCP)
www.dell.com | support.dell.com
Command Mode
DHCP <POOL>
Default
None
Command
History
domain-name
c s
Assign a domain to clients based on address pool.
Syntax
domain-name
name
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
excluded-address
c s
Prevent the server from leasing an address or range of addresses in the pool.
Syntax
excluded-address
[address | low-address high-address]
Parameters
Command Mode
DHCP
Default
None
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
name
Give a name to the group of addresses in a pool.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter a single address to be excluded from the pool.
low-address
Enter the lowest address in a range of addresses to be excluded from
the pool.
high-address
Enter the highest address in a range of addresses to be excluded from
the pool.