Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 503
Command
History
hardware-address
c s
For manual configurations, specify the client hardware address.
Syntax
hardware-address
address
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
host
c s
For manual (rather than automatic) configurations, assign a host to a single-address
pool.
Syntax host address
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
lease
c s
Specify a lease time for the addresses in a pool.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter the hardware address of the client.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
address/mask
Enter the host IP address and subnet mask.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.