Reference Guide

Equal Cost Multi-Path | 523
link-bundle-distribution trigger-threshold
Provides a mechanism to set the threshold to trigger when traffic distribution will
begin being monitored on an ECMP link bundle.
Syntax
link-bundle-distribution trigger-threshold
[percent]
To exit from ecmp group mode, use the
exit command.
Parameters
Command Modes
EXEC Privilege
Command
History
show config
Display the ECMP configuration.
Syntax show config
Command Modes
CONFIGURATION-ECMP-GROUP
Command
History
Related
Commands
show link-bundle distribution
Display the link-bundle distribution for the interfaces in the bundle, type of bundle
(LAG or ECMP) and the most recently calculated interface utilization (either bytes
per second rate or maximum rate) for each interface.
Syntax show link-bundle-distribution
Command Modes
EXEC Privilege
percent
Indicate the threshold value when traffic distribution will start being
monitored on an ECMP link bundle.
Range: 1 to 90%
Default: 60%
Version 8.3.19.0 Introduced on S4820T
Version 8.3.10.0 Introduced on S4810
Version 8.3.19.0 Introduced on S4820T
Version 8.3.10.0 Introduced on S4810
show running-config
ecmp-group
Display interfaces, LAG, or LAG link bundles being monitored
for uneven traffic distribution