Reference Guide

534 | FIP Snooping
www.dell.com | support.dell.com
Usage
Information
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum
number of FIP snooping sessions supported per ENode server is 16.
fip-snooping fc-map
Configure the FC-MAP value used by FIP snooping on all VLANs.
Syntax
fip-snooping fc-map fc-map-value
To remove the configured FM-MAP value, use the no fip-snooping fc-map command.
Parameters
Defaults
0x0EFC00
Command Mode
CONFIGURATION
VLAN INTERFACE
Command
History
fip-snooping port-mode fcoe-trusted
Configure the port for bridge-to-bridge links.
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link configuration from the port, use the no fip-snooping port-mode
fcoe-trusted command.
Command Modes
INTERFACE
Command
History
Usage
Information
The maximum number of FCoE VLANs supported on the switch is eight.
fc-map-value
Enter the FC-MAP value used by FIP snooping.
The range is from 0EFC00 to 0EFCFF.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module