Reference Guide

54 | File Management
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
• mac for the current MAC ACL configuration
•
mac-address-table for the current MAC configuration
•
management-route for the current Management port forwarding configuration
•
mld for the current MLD configuration
•
monitor for the current Monitor configuration
•
mroute for the current Mroutes configuration
•
msdp for the current MSDP configuration
•
ntp for the current NTP configuration
•
ospf for the current OSPF configuration
•
pim for the current PIM configuration
•
policy-map-input for the current input policy map configuration
•
policy-map-output for the current output policy map configuration
•
po-failover-group for the current Port-channel failover-group configuration
•
prefix-list for the current prefix-list configuration
•
privilege for the current privilege configuration
•
qos-policy-input for the current input qos policy configuration
•
qos-policy-output for the current output qos policy configuration
•
radius for the current RADIUS configuration
•
redirect-list for the current redirect-list configuration
•
redundancy for the current RPM redundancy configuration
•
resolve for the current DNS configuration
•
rip for the current RIP configuration
•
rmon for the current RMON configuration
•
route-map for the current route map configuration
•sflow for the current sFlow configuration
• snmp for the current SNMP configuration
•
spanning-tree for the current spanning tree configuration
•
static for the current static route configuration
•
status for the file status information
•
tacacs+ for the current TACACS+ configuration
•
tftp for the current TFTP configuration
•
trace-group for the current trace-group configuration
•
trace-list for the current trace-list configuration
•
uplink-state-group for the uplink state group configuration
•
users for the current users configuration
•
vlt for the current VLT configuration
•
wred-profile for the current wred-profile configuration
config
ured
(OPTIONAL) Enter the keyword configuration to display line card interfaces with
non-default configurations only.
status
(OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
Version 7.8.1.0 Added hardware-monitor option
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date
and time) and who made the change
Version 6.5.4.0 Added status option