Reference Guide

544 | Force10 Resilient Ring Protocol (FRRP)
www.dell.com | support.dell.com
• A VLAN configured as control VLAN for a ring cannot be configured as control
or member VLAN for any other ring.
• Member VLANs across multiple rings are not supported in Master nodes.
• If multiple rings share one or more member VLANs, they cannot share any links
between them.
• Each ring can have only one Master node; all others are Transit nodes.
clear frrp
c e
Clear the FRRP statistics counters.
Syntax
clear frrp [ring-id]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Example
FTOS#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
FTOS#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
FTOS#
Usage
Information
Executing this command, without the optional ring-id, will clear statistics counters on
all the available rings. FTOS requires a command line confirmation before the
command is executed. This commands clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Related
Commands
ring-id
(Optional) Enter the ring identification number.
Range: 1 to 255
Version 8.3.19.0 Introduced for S4820T
Version 8.3.7.0 Introduced for S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.5.1.0 Introduced
show frrp Display the Resilient Ring Protocol configuration