Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 545
debug frrp
c e
Enable FRRP debugging.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the
no debug frrp {event | packet | detail} {ring-id} [count
number] command.
Parameters
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
Usage
Information
Since the Resilient Ring Protocol can potentially transmit 20 packets per interface,
debug information must be restricted.
description
c e
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the
no description [Word] command.
Parameters
Defaults
No default values or behavior
event
Enter the keyword event to display debug information related to ring
protocol transitions.
packet
Enter the keyword packet to display brief debug information related
to control packets.
detail
Enter the keyword detail to display detailed debug information
related to the entire ring protocol packets.
ring-id
(Optional) Enter the ring identification number.
Range: 1 to 255
count number
Enter the keyword count followed by the number of debug outputs.
Range: 1 to 65534
Version 8.3.19.0 Introduced for the S4820T
Version 8.3.7.0 Introduced for the S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
Word
Enter a description of the ring.
Maximum: 255 characters