Reference Guide

548 | Force10 Resilient Ring Protocol (FRRP)
www.dell.com | support.dell.com
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-frrp)
Command
History
mode
c e
Set the Master or Transit mode of the ring.
Syntax
mode {master | transit}
To reset the mode, use the
no mode {master | transit} command.
Parameters
Defaults
Mode None
Command Modes
CONFIGURATION (conf-frrp)
Command
History
protocol frrp
c e
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the
no protocol frrp {ring-id} command.
Parameters
Defaults
No default values or behavior
Version 8.3.19.0 Introduced for the S4820T
Version 8.3.7.0 Introduced for the S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
master
Enter the keyword master to set the Ring node to Master mode.
transit
Enter the keyword transit to set the Ring node to Transit mode.
Version 8.3.19.0 Introduced for the S4820T
Version 8.3.7.0 Introduced for the S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
ring-id
Enter the ring identification number.
Range: 1 to 255