Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 549
Command Modes
CONFIGURATION
Command
History
Usage
Information
This command places you into the Resilient Ring Protocol. After executing this
command, the command line prompt changes to conf-frrp.
show frrp
c e
Display the Resilient Ring Protocol configuration.
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Example
(show frrp
summary)
FTOS#show frrp summary
Ring-ID State Mode Ctrl_Vlan Member_Vlans
-----------------------------------------------------------------
2 UP Master 2 11-20, 25,27-30
31 UP Transit 31 40-41
50 Down Transit 50 32
FTOS#
Version 8.3.19.0 Introduced for the S4820T
Version 8.3.7.0 Introduced for the S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
ring-id
Enter the ring identification number.
Range: 1 to 255
summary
(OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Version 8.3.19.0 Introduced for the S4820T
Version 8.3.7.0 Introduced for the S4810
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced