Reference Guide

GARP VLAN Registration (GVRP) | 559
Command
History
Usage
Information
The fixed registration prevents an interface, configured via the command line to
belong to a VLAN (static configuration), from being un-configured when it receives
a Leave message. Therefore, the registration mode on that interface is fixed.
The
normal registration is the default registration. The port’s membership in the
VLANs depends on GVRP. The interface becomes a member of VLANs after
learning about the VLAN through GVRP. If the VLAN is removed from the port that
sends GVRP advertisements to this device, then the port will stop being a member of
the VLAN.
The
forbidden is used when you do not want the interface to advertise or learn about
VLANs through GVRP.
Related
Commands
protocol gvrp
c e s
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
show config
c e s
Display the global GVRP configuration.
Syntax
show config
Command Modes
CONFIGURATION-GVRP
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C, E, and S-Series
show gvrp Display the GVRP configuration including the registration
Version 7.6.1.0 Introduced on C, E, and S-Series
disable Globally disable GVRP.