Reference Guide

566 | High Availability (HA)
www.dell.com | support.dell.com
• redundancy sfm standby
• redundancy synchronize
• show patch
• show processes restartable
• show redundancy
patch flash://RUNTIME_PATCH_DIR
e
Insert an In-Service Modular Hot-Fix patch.
Syntax
patch flash://RUNTIME_PATCH_DIR
/patch-filename
To remove the patch, enter no patch flash://RUNTIME_PATCH_DIR/patch-filename
Defaults
None
Command Modes
CONFIGURATION
Command
History
Usage
Information
The patch filename includes the FTOS version, the platform, the cpu, and the process
it affects (FTOS-platform-cpu-process-patchversion.rtp). For example, a patch
labeled
7.8.1.0-EH-rp2-l2mgr-1.rtp identifies that this patch applies to FTOS version
7.8.1.0 - E-Series platform, for RP2, addressing the layer 2 management process, and
this is the first version of this patch.
There is no need to reload or reboot the system when the patch is inserted. The
In-Service Modular patch replaces the existing process code. Once installation is
complete, the system executes the patch code as though it was always there.
Related
Commands
process restartable
e
Enable a process to be restarted. Restartablility is subject to a maximum restart limit
— the limit is defined as a configured amount of restarts within a configured amount
of time. On the software exception that exceeds the limit, the system reloads (for
systems with a single RPM) or fails over (for systems with dual RPMs).
Syntax
process restartable
[process] [count number] [period minutes]
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.2.1.0 Introduced
show patch Display the system patches loaded with the In-Service Modular Hot
Fix Command.