Reference Guide

High Availability (HA) | 571
redundancy reset-counter
e
Reset failover counter and timestamp information displayed in the show redundancy
command output.
Syntax redundancy reset-counter
Defaults
Not configured
Command Modes
EXEC Privilege
Command
History
redundancy sfm standby
c
Place the SFM in an offline state.
Syntax redundancy sfm standby
Place the SFM in an online state using the command no redundancy sfm standby
command.
Defaults
The SFM is online by default.
Command Modes
CONFIGURATION
Command
History
Usage
Information
When a secondary RPM with logical SFM is inserted or removed, the system must
add or remove the backplane links to the switch fabric trunk. To avoid traffic
disruption, use this command when the secondary RPM is inserted. When this
command is executed, the logical SFM on the standby RPM is immediately taken
offline and the SFM state is set as “standby”.
Example
FTOS#show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
---------------------------------------------------------------------------
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on E-Series
Version 7.5.1.0 Introduced on C-Series Only
Note: This command could affect traffic when taking the secondary SFM offline.