Reference Guide

572 | High Availability (HA)
www.dell.com | support.dell.com
0 active
1 active
FTOS#configure
FTOS(conf)#redundancy sfm standby
Taking secondary SFM offline...
!
FTOS(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
---------------------------------------------------------------------------
0 active
1 standby
FTOS(conf)#no redundancy sfm
Taking secondary SFM online...
!
FTOS(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
---------------------------------------------------------------------------
0 active
1 active
Related
Commands
redundancy synchronize
c e
Manually synchronize data once between the Primary RPM and the Secondary RPM.
Syntax
redundancy synchronize [full | persistent-data | system-data]
Parameters
Defaults
Not configured.
Command Modes
EXEC Privilege
Command
History
show sfm Display the SFM status
show switch links Display the switch fabric backplane or internal status.
full
Enter the keyword full to synchronize all data.
persistent-data
Enter the keywords persistent-data to synchronize the startup
configuration between RPMs.
system-data
Enter the keywords system-data to synchronize persistent-data and the
running configuration file, event log, SFM and line card states.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on E-Series ExaScale