Reference Guide

File Management |59
FTOS#
upgrade (E-Series version)
e
Upgrade the bootflash, boot selector, or system image on a processor.
Syntax
upgrade {bootflash-image | bootselector-image | system-image} {all | linecard
linecard-slot | rpm} {booted | file-url}
Parameters
Table 3-3. show version Command Fields
Lines beginning with Description
Dell Force10 Network... Name of the operating system
Dell Force10 Operating... OS version number
Dell Force10 Application... Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10 uptime is... Amount of time the system has been up
System image... Image file name
Chassis Type: Chassis type (E1200, E600, E600i, E300, C300, C150)
Control Processor:... Control processor information and amount of memory on processor.
Route Processor 1:... E-Series route processor 1 information and the amount of memory
on that processor.
Route Processor 2:... E-Series route processor 2 information and the amount of memory
on that processor.
128K bytes... Amount and type of memory on system.
1 Route Processor... Hardware configuration of the system, including the number and
type of physical interfaces available.
bootflash-image Enter the keyword bootflash-image to upgrade the bootflash
image.
bootselector-image Enter the keyword bootselector-image to upgrade the boot
selector image.
Use with TAC supervision only.
system-image
Enter the keyword system-image to upgrade the cache boot image.
all Enter the keyword all to upgrade the bootflash/boot selector image
on all processors in the E-Series. This keyword does not upgrade
the bootflash on the standby RPM.
linecard linecard-slot Enter the keyword linecard followed by the slot number to change
the bootflash image on a specific line card.
E-Series Range: 0 to 13 on the E1200; 0 to 6 for the E600; 0 to 5 on
the E300