Reference Guide

File Management |61
Defaults
FTOS uses the boot flash image that was packed with it if no URL is specified.
Command Modes
EXEC Privilege
Command
History
Usage
Information
A system message appears stating the Bootflash upgrade status. Reload the system to
boot from the upgraded boot images.
Once the URL is specified, the same downloaded image can be used for upgrading an
individual RPM, line cards, SFM FPGA, and system-image for cache-boot without
specifying the
file-url again using the command upgrade {bootflash-image |
bootselector-image | system-image} {all | linecard linecard-slot | rpm}. After 20
minutes, the cached memory is released and returned for general use, but the URL is
maintained and you do not have to specify it for subsequent upgrades.
all Enter the keyword all to upgrade the bootflash or boot selector
image on all processors. This keyword does not upgrade the
bootflash on the standby RPM.
Enter the keyword
all after the keyword linecard to upgrade the
bootflash or boot selector image on all linecards.
linecard number Enter the keyword linecard followed by the line card slot number.
Range:
E1200 and E1200i AC/DC: 0-13
E600 and E600i: 0-6
E300: 0-5
C300: 0-7
C150: 0-3
S-Series: 0-0
rpm Enter the keyword rpm to upgrade the system image of a selector
image on all processors on the RPM.
repair
Enter this keyword to upgrade a line card newly inserted into an
already upgraded chassis. This option is only available with the
system-image keyword.
booted Upgrade the bootflash or bootselector image using the currently
running FTOS image.
file-url
Enter the following location keywords and information to upgrade
using an FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary
RPM, slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0 Introduced system-image option
Version 7.5.1.0 Introduced on C-Series
E-Series original Command