Reference Guide

62 | File Management
www.dell.com | support.dell.com
Related
Commands
upgrade (S-Series management unit and Z9000)
s z
Upgrade the bootflash image or system image of the S-Series or Z-Series
management unit.
Syntax
upgrade {boot | system} {ftp: | scp: | tftp: | flash partition: {A: |B:} | stack-unit |
usbflash | slot0:} file-url
Parameters
Defaults
No configuration or default values
Command Modes
EXEC Privilege
Command
History
Usage
Information
You must reload FTOS after executing this command. Use the command upgrade
system stack-unit (S-Series stack member) to copy FTOS from the management unit
to one or more stack members.
upgrade fpga-image Upgrade the FPGA version in the specified E-Series SFM.
boot system Display configured boot image information
boot
Enter this keyword to change the boot image.
system
Enter this keyword to change the system image.
ftp:
After entering this keyword you can either follow it with the location of the source file in
this form: //userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
scp:
After entering this keyword you can either follow it with the location of the source file in
this form:
//userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
slot0:
After entering this keyword you can either follow it with the location of the source file in
this form: //hostlocation/filepath, or press Enter to launch a prompt sequence.
tftp:
After entering this keyword you can either follow it with the location of the source file in
this form: //hostlocation/filepath, or press Enter to launch a prompt sequence.
flash:
After entering this keyword you can either follow it with the location of the source file in
this form: flash//filepath, or press Enter to launch a prompt sequence.
A: | B:
Enter the partition to upgrade from the flash.
S4810, S4820T, or Z9000 only
stack-unit:
After entering this keyword to synch the image to the stack-unit.
usbflash:
After entering this keyword you can either follow it with the location of the source file in
this form:
usbflash://filepath, or press Enter to launch a prompt sequence.
S55 only
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on S4810
Version 8.3.11.1 Introduced on the Z9000, adding support for the SSD on the Z9000 only
Version 7.7.1.0 Added support for TFTP and SCP.
Version 7.6.1.0 Introduced on S-Series