Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

File Management |63

Example

FTOS#upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/filepath) (flash partition A:/

B:)

scp: Copy from remote file system (scp://userid:password@hostip/filepath)(flash partition (A:/

B:)

tftp: Copy from remote file system (tftp://hostip/filepath)(Flash Ppartition A:/b:)

FTOS#$pgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin (Flash partition A:/

B:)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!...........................................................................................

......................................................................................................

...........................!

12946259 bytes successfully copied

FTOS#reload

Example

(S4810 & S4820T)

upgrade fpga-image

This command only be used on systems with SFM3 modules (and only when

required by the upgrade procedure in the release notes). Upgrade the FPGA version

in the specified E-Series SFM3 and automatically initiate an automatic reset to

complete the version upgrade.

Syntax

upgrade fpga-image {sfm} {all | id} [booted | flash:// | ftp: |slot0: | tftp]

Parameters

Defaults

No default values or behavior

Command Modes

EXEC Privilege

Command

History

Example

FTOS#upgrade sfm 1 autoreset

SFM1: upgrade in progress

!!! !!! !!!

SFM1: upgrade complete

SFM1 is active. Resetting it might temporarily impact traffic.

Proceed with reset [confirm yes/no]: yes

FTOS#

sfm

Enter the keyword sfm to upgrade the FPGA on the SFMs.

rpm

Enter the keyword rpm to upgrade all processors on the RPM.

all

Enter the keyword all to upgrade the FPGA on all the SFMs.

Enter the keyword id to upgrade the FPGA on all a specific SFM.

Enter the path to the upgrade source. Entering <CR> updates the FPGA from the

flash.

Version 8.3.1.0 Added rpm option

Version 7.5.1.0 Introduced on E-Series