Reference Guide

Interfaces | 639
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC
Command
History
Example
FTOS#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress
Max-Sup
State
Gi 3/2 Up 0 0 20 800 4500 120
Gi 3/10 Up 0 0 5 750 2500 20
FTOS#
Related
Commands
show interfaces debounce
e
Display information on interfaces with debounce timer configured.
Syntax
show interfaces debounce interface
interface
(Optional) Enter one of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale
and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
summary
(OPTIONAL) Enter the keyword summary to display the current
summary of dampening data, including the number of interfaces
configured and the number of interfaces suppressed, if any.
detail
(OPTIONAL) Enter the keyword detail to display detailed interface
dampening data.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced
dampening Configure dampening on an interface
show interfaces Display information on a specific physical interface or virtual
interface.
show interfaces configured Display any interface with a non-default configuration.