Reference Guide

648 | Interfaces
www.dell.com | support.dell.com
Vlan 2
Name: GigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--
Related
Commands
show interfaces transceiver
c e s z
Display the physical status and operational status of an installed transceiver. The output also
displays the transceiver’s serial number.
Syntax
show interfaces
[gigabitethernet slot/port | tengigabitethernet slot/port | fortyGigE slot/port] transceiver
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Table 23-8. Items in show interfaces switchport Command Example
Items Description
Name Displays the interface’s type, slot and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or
hybrid (“Hybrid”), which supports both untagged and tagged VLANs by
port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with FTOS
7.6.1, this field can display native VLAN membership by port 13/0.
interface Configure a physical interface on the switch.
show ip interface Displays Layer 3 information about the interfaces.
show interfaces Display information on a specific physical interface or virtual interface.
show interfaces
transceiver
Display the physical status and operational status of an installed
transceiver. The output also displays the transceiver’s serial number.
gigabitethernet
For a 10/100/1000 interface, enter the keyword gigabitethernet followed
by the slot/port information.
tengigabitethernet
For a 10G interface, enter the keyword tengigabitethernet followed by
the slot/port information.
fortyGigE For a 40G interface, enter the keyword fortyGigE followed by the slot/
port information.
Version 8.3.11.1 Introduced on Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.1.1.0 Introduced on E-Series ExaScale.