Reference Guide

File Management |65
FPGA restore in progress. Please do NOT power off the card.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Upgrade result :
================
Linecard 4 FPGA restore successful.
Usage
Information
Reset the card using the power-cycle option after restoring the FPGA command.
Related
Commands
upgrade fpga-image
c
Upgrade the primary FPGA image.
Syntax
upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga |
link-fpga
] | all} {booted | file-url}
Parameters
Defaults
None.
reset Reset a card.
rpm number
Enter rpm followed by the RPM slot number to upgrade an RPM
FPGA
Range: 0-1
linecard number
Enter linecard followed by the line card slot number to upgrade a
linecard FPGA.
Range: 0-7 on the C300, 0-3 on the C150
all
Enter the keyword all to upgrade all RPM and linecard FPGAs.
Enter the keyword
all after the keyword rpm to upgrade all FPGAs
on all RPMs.
Enter the keyword
all after the keyword linecard to upgrade all
FPGAs on all linecards.
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system
FPGA on a fiber linecard. Contact the Dell Force10 TAC before
using this keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a
fiber linecard. Contact the Dell Force10 TAC before using this
keyword.
booted Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade
the FPGA using an FTOS image other than the one currently
running:
• To specify an FTOS image on the internal flash, enter
flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary
RPM,
slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename