Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

641

642

643

644

645

646

647

648

649

650

650 | Interfaces

www.dell.com | support.dell.com

SFP 1 TX Power Low Warning threshold = 0.079mW

SFP 1 RX Power Low Warning threshold = 0.016mW

===================================

SFP 1 Temperature = 39.930C

SFP 1 Voltage = 3.293V

SFP 1 Tx Bias Current = 6.894mA

SFP 1 Tx Power = 0.328mW

SFP 1 Rx Power = 0.000mW

===================================

SFP 1 Data Ready state Bar = False

SFP 1 Rx LOS state = True

SFP 1 Tx Fault state = False

SFP 1 Rate Select state = False

SFP 1 RS state = False

SFP 1 Tx Disable state = False

===================================

SFP 1 Temperature High Alarm Flag = False

SFP 1 Voltage High Alarm Flag = False

SFP 1 Tx Bias High Alarm Flag = False

SFP 1 Tx Power High Alarm Flag = False

SFP 1 Rx Power High Alarm Flag = False

SFP 1 Temperature Low Alarm Flag = False

SFP 1 Voltage Low Alarm Flag = False

SFP 1 Tx Bias Low Alarm Flag = False

SFP 1 Tx Power Low Alarm Flag = False

SFP 1 Rx Power Low Alarm Flag = True

===================================

!-------output truncated -------------------------!

Table 23-9. Diagnostic Data in show interfaces transceiver

Line Description

Rx Power measurement

type

Output depends on the vendor, typically either “Average” or “OMA”

(Receiver optical modulation amplitude).

Temp High Alarm

threshold

Factory-defined setting, typically in Centigrade. Value differs

between SFPs and SFP+.

Voltage High Alarm

threshold

Displays the interface index number used by SNMP to identify the

interface.

Bias High Alarm threshold Factory-defined setting. Value can differ between SFP and SFP+.

TX Power High Alarm

threshold