Reference Guide

652 | Interfaces
www.dell.com | support.dell.com
Tx Fault state This is the digital state of the Tx Fault output pin.
Rate Select state This is the digital state of the SFP rate_select input pin.
RS state This is the reserved digital state of the pin AS(1) per SFF-8079 and
RS(1) per SFF-8431.
Tx Disable state If the admin status of the port is down then this flag will be set to true.
Temperature High Alarm
Flag
This can be either true/False and it depends on the Current
Temperature value displayed above.
Voltage High Alarm Flag This can be either true or false, depending on the Current voltage
value displayed above.
Tx Bias High Alarm Flag This can be either true or false, depending on the present Tx bias
current value displayed above.
Tx Power High Alarm Flag This can be either true or false, depending on the Current Tx power
value displayed above.
Rx Power High Alarm Flag This can be either true or false, depending on the Current Rx power
value displayed above.
Temperature Low Alarm
Flag
This can be either true or false, depending on the Current Temperature
value displayed above.
Voltage Low Alarm Flag This can be either true or false, depending on the Current voltage
value displayed above.
Tx Bias Low Alarm Flag This can be either true or false, depending on the Tx bias current value
displayed above.
Tx Power Low Alarm Flag This can be either true or false, depending on the Current Tx power
value displayed above.
Rx Power Low Alarm Flag This can be either true or false, depending on the Current Rx power
value displayed above.
Temperature High Warning
Flag
This can be either true or false, depending on the Current Temperature
value displayed above.
Voltage High Warning Flag This can be either true or false, depending on the Current voltage
value displayed above.
Tx Bias High Warning Flag This can be either true or false, depending on the Tx bias current value
displayed above.
Tx Power High Warning
Flag
This can be either true or false, depending on the Current Tx power
value displayed above.
Rx Power High Warning
Flag
This can be either true or false, depending on the Current Tx power
value displayed above.
Temperature Low Warning
Flag
This can be either true or false, depending on the Current Temperature
value displayed above.
Voltage Low Warning Flag This can be either true or false, depending on the Current voltage
value displayed above.
Tx Bias Low Warning Flag This can be either true or false, depending on the present Tx bias
current value displayed above.
Table 23-9. Diagnostic Data in show interfaces transceiver (continued)
Line Description