Reference Guide

Interfaces | 667
Example
(show interfaces
port-channel brief)
FTOS#sh int por 1 br
LAG Mode Status Uptime Ports
1 L2 up 00:00:08 Gi 3/0 (Up) *
Gi 3/1 (Down)
Gi 3/2 (Up)
FTOS#
Table 23-11. show interfaces port-channel Command Example Fields
Field Description
Port-Channel 1... Displays the LAG’s status. In the example, the status of the LAG’s
LAG fate-sharing group (“Failover-group”) is listed.
Hardware is... Displays the interface’s hardware information and its assigned MAC
address.
Port-channel is part... Indicates whether the LAG is part of a LAG fate-sharing group
(“Failover-group”).
Internet address... States whether an IP address is assigned to the interface. If one is, that
address is displayed.
MTU 1554... Displays link and IP MTU.
LineSpeed Displays the interface’s line speed. For a port channel interface, it is
the line speed of the interfaces in the port channel.
Members in this... Displays the interfaces belonging to this port channel.
ARP type:... Displays the ARP type and the ARP timeout value for the interface.
Last clearing... Displays the time when the
show interfaces counters were cleared.
Queueing strategy. States the packet queuing strategy. FIFO means first in first out.
packets input... Displays the number of packets and bytes into the interface.
Input 0 IP packets... Displays the number of packets with IP headers, VLAN tagged
headers and MPLS headers.
The number of packets may not add correctly because a VLAN tagged
IP packet counts as both a VLAN packet and an IP packet.
0 64-byte... Displays the size of packets and the number of those packets entering
that interface. This information is displayed over two lines.
Received 0... Displays the type and number of errors or other specific packets
received. This information is displayed over three lines.
Output 0... Displays the type and number of packets sent out the interface. This
information is displayed over three lines.
Rate information... Displays the traffic rate information into and out of the interface.
Traffic rate is displayed in bits and packets per second.
Time since... Displays the time since the last change in the configuration of this
interface.