Reference Guide

684 | IPv4 Routing
www.dell.com | support.dell.com
Usage
Information
Use this command to clear Layer 3 CAM inconsistencies.
Related
Commands
clear ip route
c e s
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask | vrf vrf instance}
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
clear tcp statistics
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
Caution: Executing this command will cause traffic disruption.
show ip fib linecard Show FIB entries.
*
Enter an asterisk (*) to clear all learned IP routes.
ip-address mask
Enter a specific IP address and mask in dotted decimal format to
clear that IP address from the routing table.
vrf instance (Optional) E-Series Only: Clear only the routes tied to the VRF
instance.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip route Assign an IP route to the switch.
show ip route View the routing table.
show ip route summary View a summary of the routing table.