Reference Guide

IPv4 Routing | 689
c e s
View a log of IP packets sent and received.
Syntax
debug ip packet [access-group name] [count value] [interface]
To disable debugging, use the
no debug ip packet [access-group name] [count value]
[
interface] command.
Parameters
Command Mode
EXEC Privilege
Command
History
Example
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 54, sending
access-group name
Enter the keyword access-group followed by the access list name
(maximum 16 characters) to limit the debug output based on the
defined rules in the ACL.
count value
(OPTIONAL) Enter the keyword count followed by the count value.
Range: 1 to 65534
Default: Infinity
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
• For the management interface on the RPM, enter the keyword
managementethernet followed by the slot/port information. The
slot range is 0-1 and the port range is 0.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and
1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from
1 to 4094.
Version 8.3.19.0 Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Support 4094 VLANs on E-Series ExaScale (prior limit was 2094)
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Added the access-group option
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 6.3.1.0 Added the count option