Reference Guide

692 | IPv4 Routing
www.dell.com | support.dell.com
Command Modes
INTERFACE
Command
History
Usage
Information
You must be in the INTERFACE mode before you add an IP address to an interface.
Assign an IP address to an interface prior to entering the ROUTER OSPF mode.
ip directed-broadcast
c e s
Enables the interface to receive directed broadcast packets.
Syntax
ip directed-broadcast
To disable the interface from receiving directed broadcast packets, enter no ip
directed-broadcast.
Defaults
Disabled (that is, the interface does not receive directed broadcast packets)
Command Modes
INTERFACE
Command
History
ip domain-list
c e s
Configure names to complete unqualified host names.
Syntax
ip domain-list name
To remove the name, use the
no ip domain-list name command.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series