Reference Guide

IPv4 Routing | 709
Related
Commands
show arp
c e s
Display the ARP table.
Syntax
show arp [vrf vrf nanometers interface | ip ip-address [mask] | macaddress mac-address
[
mac-address mask]] [cpu {cp | rp1 | rp2}] [static | dynamic] [summary]
Parameters
interface ManagementEthernet Configure the Management port on the system (either the
Primary or Standby RPM).
duplex (Management) Set the mode of the Management interface.
speed (Management interface) Set the speed for the Management interface.
vrf name E-Series Only: Show only the ARP cache entries tied to the VRF
process.
cpu (OPTIONAL) Enter the keyword cpu with one of the following
keywords to view ARP entries on that CPU:
•
cp - view ARP entries on the control processer.
•
rp1 - view ARP entries on Routing Processor 1.
•
rp2 - view ARP entries on Routing Processor 2.
interface interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For the Management interface, enter the keyword
managementethernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series and S-Series Range: 1 to 128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1
to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to
4094.
ip ip-address mask (OPTIONAL) Enter the keyword ip followed by an IP address in the
dotted decimal format. Enter the optional IP address mask in the slash
prefix format (/x).
macaddress
mac-address mask
(OPTIONAL) Enter the keyword macaddress followed by a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional MAC address
mask in nn:nn:nn:nn:nn format also.
static
(OPTIONAL) Enter the keyword static to view entries entered manually.