Reference Guide

716 | IPv4 Routing
www.dell.com | support.dell.com
show ip cam stack-unit
s
Display content-addressable memory (CAM) entries for an S-Series switch.
Syntax
show ip cam stack-unit 0-7 port-set pipe-number [ip-address mask [longer-prefixes] |
detail | member-info | summary]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes
Destination EC CG V C VId Mac-Addr Port
Table 24-8. show ip cam summary Command Example Fields
Field Description
Prefix Length Displays the prefix-length or mask for the IP address configured on the linecard 0
port pipe 0.
Current Use Displays the number of routes currently configured for the corresponding prefix or
mask on the linecard 0 port pipe 0.
Initial Size Displays the CAM size allocated by FTOS for the corresponding mask. The CAM
size is adjusted by FTOS if the number of routes for the mask exceeds the initial
allocation.
0-7 Enter the stack-unit ID, from 0 to 7.
pipe-number Enter the number of the Port-Pipe number.
S50n, S50V range: 0 to 1; S25N, S25P, S25V range: 0 to 0
ip-address mask
[
longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for
that route only.
Enter the keyword
longer-prefixes to view routes with a common prefix.
detail
Enter the keyword detail to display the group index ID used by the ecmp
routes in the CAM.
member-info Enter the keyword member-info to display the group index used by the
ecmp, the number of egress ports (members) for the ecmp, and the port
details of each member.
The detail information under
member-info will give the MAC address,
VLAN ID and gateway of every member port of the ecmp.
summary (OPTIONAL) Enter the keyword summary to view a table listing route
prefixes and the total number routes which can be entered in to CAM.
Version 8.3.19.0 Introduced on S4820T
Version 7.7.1.0 Modified: Added support for up to seven stack members.
Version 7.6.1.0 Introduced on S-Series