Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T
711712713714715716717718719720
IPv4 Routing | 717
----------------- -- -- - - ----- ----------------- -------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00 3f01 CP
FTOS#
Example
(show ip cam
stack-unit
ecmp-group detail)
FTOS#show ip cam stack-unit 0 po 0 ecmp-group detail
Destination EC CG V C VId Mac-Addr Port ECMP Group-Index
----------------- -- -- - - ----- ----------------- -------------
-------------------
1.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 -
2.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 -
1.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
1.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
100.1.1.0 1 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 0
100.1.1.0 1 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 0
0.0.0.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
FTOS#
Example
(show ip cam
stack-unit
ecmp-group
member-info detail)
FTOS#show ip cam stack-unit 0 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID Gateway
----------- ------------ --------------- --------- --------- ---------
0 2 00:01:e8:8a:d6:58 Te 0/3 0 1.1.1.2
00:01:e8:8a:d6:58 Te 0/8 0 2.1.1.2
FTOS#
Table 24-9. show ip cam Command Example Fields
Field Description
Destination Displays the destination route of the index.
EC Displays the number of equal cost multipaths (ECMP) available for the default
route for non-Jumbo line cards.
Displays 0,1 when ECMP is more than 8, for Jumbo line cards.
CG Displays 0.
V Displays a 1 if the entry is valid and a 0 otherwise.
C Displays the CPU bit.
1 indicates that a packet hitting this entry is forwarded to the control processor,
depending on Egress port.
V Id Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Mac Addr Displays the next-hop router’s MAC address.
Port Displays the egress interface. Use the second half of the entry to determine the
interface. For example, in the entry 17cl CP, the CP is the pertinent portion.
CP = control processor
Gi = Gigabit Ethernet interface
Te = 10 Gigabit Ethernet interface