Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T
711712713714715716717718719720
718 | IPv4 Routing
www.dell.com | support.dell.com
show ip fib linecard
c e
View all Forwarding Information Base (FIB) entries.
Syntax
show ip fib linecard slot-number [vrf vrf instance | ip-address/prefix-list | summary]
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Example
FTOS>show ip fib linecard 12
Destination Gateway First-Hop Mac-Addr
Port VId Index EC
-------------------- -------------------------- --------------
---------------- ------- --------------
3.0.0.0/8 via 100.10.10.10, So 2/8 100.10.10.10
00:01:e8:00:03:ff So 2/8 0 60260 0
3.0.0.0/8 via 101.10.10.10, So 2/9
100.10.10.0/24 Direct, So 2/8 0.0.0.0
00:01:e8:00:03:ff So 2/8 0 11144 0
100.10.10.1/32 via 127.0.0.1 127.0.0.1
00:00:00:00:00:00 CP 0 3276 0
100.10.10.10/32 via 100.10.10.10, So 2/8 100.10.10.10
00:01:e8:00:03:ff So 2/8 0 0 0
101.10.10.0/24 Direct, So 2/9 0.0.0.0
00:00:00:00:00:00 RP2 0 11145 0
101.10.10.1/32 via 127.0.0.1 127.0.0.1
00:00:00:00:00:00 CP 0 3277 0
101.10.10.10/32 via 101.10.10.10, So 2/9 101.10.10.10
00:01:e8:01:62:32 So 2/9 0 1 0
FTOS>
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf followed by the VRF
Instance name to show the FIB cache entries tied to that VRF instance.
slot-number
Enter the number of the line card slot.
C-Series Range: 0 to 7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, 0 to 5 on a E300
ip-address mask
(OPTIONAL) Enter the IP address of the network destination to view only
information on that destination.
You must enter the IP address is dotted decimal format (A.B.C.D). You must
enter the mask in slash prefix format (/X).
longer-prefixes
(OPTIONAL) Enter the keyword longer-prefixes to view all routes with a
common prefix.
summary
(OPTIONAL) Enter the keyword summary to view the total number of
prefixes in the FIB.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series