Reference Guide

IPv4 Routing | 719
Related
Commands
show ip fib stack-unit
s
View all Forwarding Information Base (FIB) entries.
Syntax
show ip fib stack-unit 0-7 [ip-address [mask] [longer-prefixes] | summary]
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip fib stack-unit 0
Table 24-10. show ip fib linecard Command Example Fields
Field Description
Destination Lists the destination IP address.
Gateway
Displays either the word
direct and an interface for a directly
connected route or the remote IP address to be used to forward the
traffic.
First-Hop Displays the first hop IP address.
Mac-Addr Displays the MAC address.
Port Displays the egress-port information.
VId Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed.
Index Displays the internal interface number.
EC Displays the number of ECMP paths.
clear ip fib linecard Clear FIB entries on a specified line card.
0-7
Enter the S-Series stack unit ID, from 0 to 7.
ip-address mask
(OPTIONAL) Enter the IP address of the network destination to view only
information on that destination.
Enter the IP address in dotted decimal format (A.B.C.D). You must enter the
mask in slash prefix format (/X).
longer-prefixes
(OPTIONAL) Enter the keyword longer-prefixes to view all routes with a
common prefix.
summary
(OPTIONAL) Enter the keyword summary to view the total number of
prefixes in the FIB.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Modified: Added support for up to seven stack members.
Version 7.6.1.0 Introduced on S-Series