Reference Guide

724 | IPv4 Routing
www.dell.com | support.dell.com
show ip management-route
c e
View the IP addresses assigned to the Management interface.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip management-route
Destination Gateway State
----------- ------- -----
10.1.2.0/24 ManagementEthernet 0/0 Connected
172.16.1.0/24 10.1.2.4 Active
FTOS#
show ipv6 management-route
Status
States whether the interface is enabled (
up) or disabled
(
administratively down).
Protocol
States whether IP is enabled (
up) or disabled (down) on the interface.
Table 24-13. show ip interface brief Column Headings (continued)
Field Description
all
(OPTIONAL) Enter the keyword all to view all IP addresses assigned to
all Management interfaces on the switch.
connected
(OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
summary
(OPTIONAL) Enter the keyword summary to view a table listing the
number of active and non-active routes and their sources.
static
(OPTIONAL) Enter the keyword static to view non-active routes also.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series