Reference Guide

74 | Control and Monitoring
www.dell.com | support.dell.com
Command
History
Related
Commands
clear line
c e s
Reset a terminal line.
Syntax
clear line {line-number | aux 0 | console 0 | vty number}
Parameters
Command Modes
EXEC Privilege
Command
History
configure
c e s
Enter the CONFIGURATION mode from the EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
show
command-history
Display a buffered log of all commands entered by all users along with a
time stamp.
line-number Enter a number for one of the 12 terminal lines on the system.
Range: 0 to 11.
aux 0
Enter the keywords aux 0 to reset the Auxiliary port.
Note: This option is supported on E-Series only.
console 0
Enter the keyword console 0 to reset the Console port.
vty number Enter the keyword vty followed by a number to clear a Terminal line.
Range: 0 to 9
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
terminal
(OPTIONAL) Enter the keyword terminal to specify that you are configuring
from the terminal.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series