Reference Guide

IPv6 Access Control Lists (IPv6 ACLs) | 757
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
When all sequence numbers have been exhausted, this feature permits
re-assigning new sequence number to entries of an existing access-list.
Related
Commands
resequence prefix-list ipv6
c e s
Re-assign sequence numbers to entries of an existing prefix list.
Syntax
resequence prefix-list ipv6 {prefix-list-name StartingSeqNum Step-to-increment}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
StartingSeqNum
Enter the starting sequence number to resequence.
Range: 0 to 4294967290
Step-to-Increment
Enter the step to increment the sequence number.
Range: 1 to 4294967290
Version 8.4.2.0 Introduced on the S-Series
Version 8.2.1.0 Introduced on the E-Series ExaScale
Version 7.8.1.0 Introduced on the C-Series
Version 7.4.1.0 Introduced on the E-Series TeraScale
resequence prefix-list ipv6 Resequence a prefix list
prefix-list-name
Enter the name of configured prefix list, up to 140 characters.
Increased name string to accept up to 140 characters. Prior to 7.8.1.0,
names are up to 16 characters long.
StartingSeqNum
Enter the starting sequence number to resequence.
Range: 0 – 65535
Step-to-Increment
Enter the step to increment the sequence number.
Range: 1 – 65535
Version 8.4.2.1 Introduced on the S-Series
Version 8.2.1.0 Introduced on the E-Series ExaScale
Version 7.8.1.0 Introduced on the C-Series
Version 7.4.1.0 Introduced on the E-Series TeraScale