Reference Guide

IPv6 Basics | 775
Default
100 pps
Command
History
ipv6 flowlabel-zero
Configure system to set the flow label field in the packets to zero.
Syntax
ipv6 flowlabel-zero
Use the no ipv6 flowlabel-zero command to disable the 0 from being set in the field and allow
the field to be filled by protocol operations.
Default
Disabled
Command Modes
CONFIGURATION
Default
100 pps
Command
History
Usage
Information
If the flowlabel value is already set for BGP or SSH, the system defaults to the already
configured value. All packets on the same connection are considered part of the same flow by
the system. For new connections, the new flowlabel is set to zero.
ipv6 host
c e s
Assign a name and IPv6 address to be used by the host-to-IP address mapping table.
Syntax
ipv6 host name ipv6-address
Parameters
Defaults
Not configured.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.19.0 Introduced on the S4820.
Version 8.3.12.0 Introduced on the S4810.
name Enter a text string to associate with one IP address.
ipv6-address Enter an IPv6 address (X:X:X:X::X) to be mapped to the name.