Reference Guide

784 | IPv6 Basics
www.dell.com | support.dell.com
Command Mode
EXEC
EXEC Privilege
Command
History
show ipv6 fib stack-unit
s
View all Forwarding Information Base entries.
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex will
display as zero (0) on the
show ipv6 fib stack-unit output for neighbor entries, such as ARP
entries.
summary
(OPTIONAL) Enter the keyword summary to view a summary of entries in
IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have
more specific prefixes.
Range: /0 to /128
Note: The :: notation specifies successive hexadecimal fields of zeros.
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series TeraScale
slot-number Enter the number of the stack unit.
Range: 0 to 11
summary
(OPTIONAL) Enter the keyword summary to view a summary of entries in
IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have
more specific prefixes.
Range: /0 to /128
Note: The :: notation specifies successive hexadecimal fields of zeros.
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.4.2.1 Introduced on S-Series