Reference Guide

788 | IPv6 Basics
www.dell.com | support.dell.com
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
Command
History
Usage
Information
The following table describes the information in the output example:
show ipv6 route
c e s
Displays the IPv6 routes.
Syntax
show ipv6 route [ipv6-address prefix-length] [hostname] [all] [bgp as number] [connected]
[
isis tag] [list prefix-list name] [ospf process-id] [rip] [static] [summary]
Parameter
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Valid MLD Packets The total number of packets received and sent from the last time the
elapsed time was cleared.
Reports The total number of reports (queries and unsolicited reports generated
from joins or leaves) that have been received or sent.
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed Packets The number of MLDv1 and MLDv2 packets that do not match the
requirement for a valid MLD packet.
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the
/x format.
Range: /0 to /128.
The :: notation specifies successive hexadecimal fields of zeros.
hostname
(OPTIONAL) View information for this IPv6 routes with Host Name
all
(OPTIONAL) View information for all IPv6 routes
bgp
(OPTIONAL) View information for all IPv6 BGP routes
connected
(OPTIONAL) View only the directly connected IPv6 routes.
isis
(OPTIONAL) View information for all IPv6 IS-IS routes
list
(OPTIONAL) View the IPv6 prefix list
ospf
(OPTIONAL) View information for all IPv6 OSPF routes
rip
(OPTIONAL for E-Series only) View information for all IPv6 RIP routes
static
(OPTIONAL) View only routes configured by the ipv6 route command.
summary
(OPTIONAL) View a brief list of the configured IPv6 routes.