Reference Guide

802 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
bgp confederation peers
c e
Specify the Autonomous Systems (ASs) that belong to the BGP confederation.
Syntax
bgp confederation peers as-number [...as-number]
To enter no bgp confederation peer.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Command
History
Usage
Information
The Autonomous Systems configured in this command are visible to the EBGP
neighbors. Each Autonomous System is fully meshed and contains a few connections
to other Autonomous Systems.
After specifying autonomous systems numbers for the BGP confederation, recycle
the peers to update their configuration.
Related
Commands
bgp dampening
c e
Enable BGP route dampening and configure the dampening parameters.
Syntax
bgp dampening [half-life reuse suppress max-suppress-time] [route-map map-name]
To disable route dampening, use the
no bgp dampening [half-life reuse suppress
max-suppress-time] [route-map map-name] command.
as-number Enter the AS number.
Range: 1 to 65535
...as-number
(OPTIONAL) Enter up to 16 confederation numbers.
Range: 1 to 65535.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
bgp confederation
identifier
Configure a confederation ID.