Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 813
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast {flap-statistics | soft {in | out}} |
unicast {flap-statistics | soft {in | out}} | ipv6 unicast {flap-statistics | soft {in | out}| soft
[in
|
out]
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp ipv6-address
c e
Reset BGP sessions specific to an IPv6 address on the E-Series. The soft parameter
(BGP Soft Reconfiguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-statistics | soft {in | out}} |
unicast {flap-statistics | soft {in | out}} | ipv6 unicast {flap-statistics | soft {in | out}| soft
[in
|
out]
as-number
Enter an autonomous system (AS) number to reset neighbors
belonging to that AS. If used without a qualifier, the keyword resets
all neighbors belonging to that AS.
Range: 1 to 65535
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to clear all flap
statistics belonging to that AS or a specified address family within
that AS.
ipv4
(OPTIONAL) Enter the keyword ipv4 to select options for that
address family.
ipv6
(OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
unicast
(OPTIONAL) Enter the keyword unicast to select the unicast option
within the selected address family.
multicast
(OPTIONAL) Enter the keyword multicast to select the multicast
option within the selected address family.
Multicast is supported on IPv4 only
soft
(OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
Note: If you enter clear ip bgp ipv6-address soft, both inbound and
outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out
(OPTIONAL) Enter the keyword out to activate only outbound
policies.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale