Reference Guide

814 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp peer-group
c e
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
Command Modes
EXEC Privilege
ipv6-address
Enter an IPv6 address to reset neighbors belonging to that IP. Used
without a qualifier, the keyword resets all neighbors belonging to
that IP.
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to clear all flap
statistics belonging to that AS or a specified address family within
that IP.
ipv4
(OPTIONAL) Enter the keyword ipv4 to select options for that
address family.
ipv6
(OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
unicast
(OPTIONAL) Enter the keyword unicast to select the unicast option
within the selected address family.
multicast
(OPTIONAL) Enter the keyword multicast to select the multicast
option within the selected address family.
Multicast is supported on IPv4 only
soft
(OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
Note: If you enter clear ip bgp ip6-address soft, both inbound and
outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out
(OPTIONAL) Enter the keyword out to activate only outbound
policies.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
peer-group-name
Enter the peer group name to reset the BGP sessions within that peer
group.