Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 817
Command Modes
EXEC Privilege
Command
History
debug ip bgp
c e
Allows you to view all information on BGP, including BGP events, keepalives,
notifications, and updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] [in | out]
To disable all BGP debugging, enter
no debug ip bgp.
Parameters
Command Modes
EXEC Privilege
Command
History
peer-group name
Clear and reapply policies for all BGP routers in the specified peer
group.
ipv6 unicast
Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies. Note: If you enter soft, without an in
or
out option, both inbound and outbound policies are reset.
out
Reapply only outbound policies. Note: If you enter soft, without an
in or out option, both inbound and outbound policies are reset.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.1.0 Added support for IPv4 multicast and IPv6 unicast routes
Version 7.8.1.0 Introduced support on S4810
Version 7.7.1.0 Introduced support on C-Series
Version 7.2.1.0 Introduced on the E-Series TeraScale
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group peer-group-name
Enter the keyword peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
out
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale