Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 819
debug ip bgp ipv6 dampening
c e
View information on IPv6 routes being dampened.
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, enter
no debug ip bgp ipv6 unicast dampening.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
debug ip bgp ipv6 unicast soft-reconfiguration
c e
t
Enable soft-reconfiguration debugging for IPv6 unicast routes.
Syntax
debug ip bgp [ipv4-address | ipv6-address | peer-group-name] ipv6 unicast
soft-reconfiguration
To disable debugging, use the no debug ip bgp [ipv4-address | ipv6-address |
peer-group-name] ipv6 unicast soft-reconfiguration command.
Parameters
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out
(OPTIONAL) Enter the keyword out to view only outbound dampened
routes.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
show ip bgp ipv6 unicast
dampened-paths
View BGP dampened routes.
ipv4-addres
s
|
ipv6-addres
s
Enter the IP address of the neighbor on which you want to enable
soft-reconfiguration debugging.
peer-group-name
Enter the name of the peer group on which you want to enable
soft-reconfiguration debugging.
ipv6 unicast
Debug soft reconfiguration for IPv6 unicast routes.