Reference Guide

822 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for
BGP.
default-metric
c e
Allows you to change the metrics of redistributed routes to locally originated routes.
Use this command with the redistribute command.
Syntax
default-metric number
To return to the default setting, enter no default-metric.
Parameters
Defaults
0
Command Modes
ROUTER BGP
Command
History
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the
name of the peer group.
ipv6 unicast [ipv6-address] (OPTIONAL) Enter the keyword ipv6 unicast, and, optionally,
an ipv6 address.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view only BGP updates
sent to neighbors.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
number
Enter a number as the metric to be assigned to routes from other protocols.
Range: 1 to 4294967295.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale