Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 823
Usage
Information
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC
(MED) attribute for redistributed routes only.
Related
Commands
description
c e
Enter a description of the BGP routing protocol
Syntax
description {description}
To remove the description, use the
no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER BGP
Command
History
Related
Commands
distance bgp
c e
Configure three administrative distances for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, enter no distance bgp.
Parameters
bgp always-compare-med Enable comparison of all BGP MED attributes.
redistribute Redistribute routes from other routing protocols into BGP.
description
Enter a description to identify the BGP protocol (80 characters maximum).
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
router bgp Enter ROUTER mode on the switch.
external-distance
Enter a number to assign to routes learned from a neighbor external to the
AS.
Range: 1 to 255.
Default: 20