Reference Guide

850 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Command
History
Usage
Information
When you enable bgp non-deterministic-med command, the show ip bgp command
output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
c e
View BGP neighbors in a specific cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp ipv6 unicast community
c e
View information on all routes with Community attributes or view specific BGP
community groups.
Syntax
show ip bgp ipv6 unicast community [community-number] [local-as] [no-export]
[
no-advertise]
Parameters
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
community-number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous system.
You can specify up to eight community numbers to view information on
those community groups.
local-AS
Enter the keywords local-AS to view all routes with the COMMUNITY
attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP peers.