Reference Guide

858 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Related
Commands
show ip bgp ipv6 unicast peer-group
c e
Allows you to view information on the BGP peers in a peer group.
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Prefixes accepted Displays the number of network prefixes accepted by the
router and the amount of memory used to process those
prefixes.
Prefixes advertised Displays the number of network prefixes advertised, the
number rejected and the number withdrawn from the BGP
routing table.
Connections established Displays the number of TCP connections established and
dropped between the two peers to exchange BGP information.
Last reset Displays the amount of time since the peering session was last
reset. Also states if the peer resets the peering session.
If the peering session was never reset, the word never is
displayed.
Local host: Displays the peering address of the local router and the TCP
port number.
Foreign host: Displays the peering address of the neighbor and the TCP port
number.
Table 27-1. Command Example fields:
show ip bgp ipv6 unicast neighbors
Lines beginning with Description
show ip bgp ipv6 unicast View the current BGP routing table.
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
detail
(OPTIONAL) Enter the keyword detail to view peer-group-specific
information for the IPv6 address family.
summary
(OPTIONAL) Enter the keyword summary to view status information of
the peers in that peer group.
The output is the same as that found in show ip bgp ipv6 unicast
summary command
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810