Reference Guide

866 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
address family
c e
This command changes the context to SAFI (Subsequent Address Family Identifier).
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast command.
Parameters
Defaults
IPv6 Unicast
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Usage
Information
All subsequent commands will apply to this address family once this command is
executed. You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family
by entering exit and returning to the Router BGP context.
aggregate-address
c e
Summarize a range of prefixes to minimize the number of entries in the routing table.
Syntax
aggregate-address ipv6-address prefix-length [advertise-map map-name] [as-set]
[
attribute-map map-name] [summary-only] [suppress-map map-name]
Parameters
ipv6
Enter the keyword ipv6 to specify the address family as IPv6.
unicast
Enter the keyword unicast to specify multicast as SAFI.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
advertise-map map-name (OPTIONAL) Enter the keywords advertise-map followed by the
name of a configured route map to set filters for advertising an
aggregate route.
as-set
(OPTIONAL) Enter the keyword as-set to generate path attribute
information and include it in the aggregate.
AS_SET includes AS_PATH and community information from the
routes included in the aggregated route.
attribute-map map-name (OPTIONAL) Enter the keywords attribute-map followed by the
name of a configured route map to modify attributes of the
aggregate, excluding AS_PATH and NEXT_HOP attributes.