Reference Guide

868 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Parameters
Defaults
Disabled.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
clear ip bgp ipv6 unicast
c e
Reset MBGP sessions.
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length [dampening | flap-statistics]
peer-group
]
Parameters
Command Modes
EXEC Privilege
Command
History
half-life time
(OPTIONAL) Enter the number of minutes after which the Penalty is
decreased. After the router assigns a Penalty of 1024 to a route, the
Penalty is decreased by half, after the half-life period expires.
Range: 1 to 45.
Default: 15 minutes
route-map map-name (OPTIONAL) Enter the keyword route-map followed by the name of a
configured route map.
Only match commands in the configured route map are supported.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
*
Enter the character * to clear all peers.
ipv6-address prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros
dampening
(OPTIONAL) Enter the keyword dampening to clear route flap
dampening information.
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to reset the flap
statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keyword peer-group to clear all members
of a peer-group.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.0 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced